Is your GE dishwasher leaking from bottom? We got you. Read on to find the causes and their easiest solutions.
GE dishwashers allow users to wash their dishes in stylish and trendy tech. Its interior is state of the art and top rated within the electronic industry. They have been the industry standard for a stable amount of time and don’t seem to be taking a step down from the ladder any time soon.
Key Points
- Leaks Due to Excess Detergent, Broken Seals, etc.
- Clogged Air Gap Results in Debris
- Damage to Center, Lower, and Upper Wash Arms Cause Jetting Leaks
- Most Common Cause of a Dishwasher Leak is a Broken Clamp or Seal
There may be multiple reasons for your GE dishwasher leaking from the bottom or potentially even from the sides. Let’s explore these throughout the article and find ways we can easily remedy the issues.
Reason # 1: Excess Detergent
One of the reasons your GE dishwasher might be leaking, whether it’s from the bottom or the sides, is due to the use of too much detergent. This will make excess soap suds escape through the gasket.
Solution
Ensure that you are using the right detergent for your GE dishwasher as the wrong detergent can cause a massive dishwasher leak. Do not use dish soap and ensure you read the instructions carefully.
Reason #2: Damaged Door Gasket
The door gasket of your dishwasher is meant to line the inside of the dishwasher door. This creates a seal that is watertight. If you see a leak from the bottom or sides of the door, chances are there’s a tear or cut in the gasket door.
Solution
Look for leaks in the gasket through gaps or cuts. You can do so by following this procedure.
- Stick a Dollar Bill in Before Closing Door
- In Case of Dollar Bill Not Sticking, Assume Gap/Cut
- Check Hinges
- If Intact, Replace Door
- If Bent, Replace Hinges
Reason #3: Clogged Air Gap
Chances are if your air gap is leaking, it has debris stuck in it. All you’ll need to do to remedy this issue is unclog the air gap. This will ensure your GE dishwasher doesn’t leak from the bottom of the door or the sides again.
Solution
To fix the air gap, you will need to follow the next few basic steps.
- Turn the Dishwasher Off
- Remove Chrome Cover from Air Gap
- Unscrew Plastic Cap on the Bottom
- Clean Out Debris
- Replace Cap and Cover
Reason #4: Loose Vent Cap
Your GE dishwasher’s vent cap is meant to let out warm, moist air. This is part of the normal drying process. However, if your vent cap is loose, it might begin to leak out of the bottom or the sides of the door.
Solution
All you need to do to fix this issue is tighten the vent cap. This should solve your problem. However, if the vent cap is still leaking, chances are you’ll need to go to customer service to have them inspect the dishwasher and, perhaps, replace the cap.
Reason #5: Loose Hose Clamp
If water is leaking to the point where there is water in the cabinet next to the dishwasher, there is a massive chance the hose clamp has come loose. The remedy for this is simple.
Solution
All you need to do to repair the loose hose clamp is the following:
Inspect Hoses Under the Cabinet
Tighten Clamps Using Screwdriver
Reason #6: Cracked Center Wash Arm
A cracked wash arm means there will be a jet of water spraying towards the door seal. This leak will need to be repaired ASAP. If this crack is not remedied, it could destroy your door seal as well.
Solution
Do not attempt to seal the crack with glue as this will break the dishwasher down and damage it more than it’ll fix the problem. To fix the wash arm, you will need to follow the next few steps:
- Check to See if Wash Arm is Intact
- If Intact, Tighten Screws
If the wash arm is loose, this will cause water to spray out in waves, making water leak out of the bottom of the dishwasher door.
Reason #7: Cracked Upper Wash Arm
A wash arm cracked on the upper side will mean that a jet of water will be spraying directly towards the door seal, damaging it. If not fixed, the door seal might require a complete replacement.
Solution
The solution for this issue is the same as that of the center wash arm.
- Check for Intact Wash Arm
- If Intact, Tighten Screws
Once again, if the wash arm is loose, this can cause major damage via waves. These leaks will be tougher to fix.
Reason #8: Cracked Lower Wash Arm
A wash arm that is cracked will end up causing a leak around the lower part of the dishwasher door. This might, in turn, cause water to leak onto the floor.
Solution
The procedure to fix this issue is the same as that of the center and upper wash arm.
- Check if Wash Arm is Intact
- If so, Tighten the Screws
A loose wash arm will cause major leaks as the water jets will cause waves. To ensure this doesn’t happen, make sure to tighten the wash arm efficiently.
FAQs
Why is my GE dishwasher leaking from the bottom?
In the majority of cases, the door gasket, the door seal, or the spray arms will be the main culprits causing the leaks. If you’ve checked these and they are not the issue, make sure to check that you’re not using too much detergent and that the bottom door gasket is sealed and does not have a gap/crack.
What is the most common cause of a GE dishwasher leaking?
Most of these leaks have to do with issues with loose clamps, caps, and seals. If these issues are taken care of, repaired, and replaced, you won’t have to worry about your GE dishwasher leaking.
