Why Is My Gas Fireplace Beeping? Simple Solutions to Stop the Noise

If you’re enjoying a cozy evening by your gas fireplace and suddenly hear a beeping noise, don’t panic. This is a common issue that often has a simple fix.


A gas fireplace beeping is usually an indication that the batteries are low, either in the remote control, receiver box, or backup ignition module. Identifying where the beeping is coming from and replacing the weak batteries will typically resolve the issue.

Identifying the Source of the Beeping

There are a few key places to check when your gas fireplace starts beeping:

1. Backup Ignition Module

Many newer gas fireplaces have an electronic ignition system that requires electricity to create a spark and ignite the gas. Some models also have a battery-powered backup ignition module in case of a power outage. If the batteries in this module are low, the fireplace may emit a beeping noise. Replacing the batteries (usually two D-cell) should stop the beeping.

2. Remote Control

If your gas fireplace is operated by a remote control, a beeping sound may indicate that the batteries in the remote are dying. Simply replace the batteries in the remote to see if this resolves the issue.

3. Receiver Box

The receiver box receives the signals sent by the remote control. This component may also contain batteries, which can trigger a beeping noise if they’re running low. Locate the receiver box (often found behind the lower grill of the fireplace) and replace the batteries.

3 2

Replacing Batteries

When replacing batteries in your gas fireplace components, keep these tips in mind:

  • Always refer to your owner’s manual for specific instructions and battery requirements for your model.
  • Use high-quality, fresh batteries for best performance and longevity.
  • If you have an intermittent pilot ignition (IPI) system, check the settings after replacing batteries. Some models need to be reset or re-synced.
  • Consider replacing fireplace batteries on a regular schedule, such as when changing smoke alarm batteries, to prevent low battery beeping.

Troubleshooting Other Issues

If replacing batteries doesn’t stop your gas fireplace from beeping, there may be another issue at play:

  • Check for any obstructions or debris near the pilot light or burner that could be interfering with ignition.
  • Ensure the gas supply is turned on and properly connected.
  • Look for any loose wires or connections and tighten as needed.
  • If the issue persists, contact a professional fireplace technician for further diagnostics and repair.


A beeping gas fireplace can be annoying, but it’s usually a simple fix. In most cases, replacing the batteries in the remote control, receiver box, or backup ignition module will stop the beeping. If you’ve checked all battery-operated components and the beeping continues, it’s best to have a professional inspect your fireplace to diagnose and resolve any underlying issues. By promptly addressing a beeping fireplace, you can get back to enjoying its warmth and ambiance worry-free.