For many years, the Whirlpool washer has been a great tool for homes and businesses. When it comes down to it, this product has loads of features for keeping your clothes clean.
Although the Whirlpool washer is well-designed, it might have a few issues. For instance, this device might go off from time to time.
However, there are several ways to deal with this problem. In this article, you can find these solutions and repair your Whirlpool washer quickly.
If Your Whirlpool Washer Turns On Then Off Immediately, Try These Fixes
Does your Whirlpool washer go off and on? If yes, then you can use the following tips to make the device work.
1. Power Cycle the Washer
You can make your Whirlpool washer better by performing a quick power cycle. To get started, remove the plug of the washer from the power outlet. Then push the power button for 30 seconds to remove the extra power. Wait for at least 15 mins before replugging the washer.
2. Think about the Power Supply
Supposing your Whirlpool washer goes on and off, then it would help if you changed your power source. So instead of working with an extension, choose a three-prong outlet. Besides, work on any fuses or circuit breaker boxes that might have issues.
Asides from the power outlet, the plug of the washer can be a cause of your Whirlpool washer problem. Instead of managing this defect, reach out to a certified technician to solve any issues.
3. Look at the Water Supply
Sometimes the condition of your water supply might be the reason for your washer problems. For instance, if the water becomes slow or stops running, the Whirlpool washer will go off.
You can solve this problem by allowing the hot and cold faucets to run fully. Also, ensure that the hose is properly connected to the washer and the water faucets. If you want the best results, you might even make the hose straight and clean the inlet screens.
4. Get a New Motor
If the motor on your Whirlpool washer has issues, you might end up with a “start and stop” problem. With this in mind, you should fix any problems that occur with your motor.
If you are sure that your washer problem comes from its motor, remove its plugs from the wall for 30 minutes. Then reconnect the machine and check if it is working.
5. Install a New Timer
Having a timer on your Whirlpool washer might be a great idea. But if the feature becomes faulty, it can affect the performance of your washer.
To check if your faulty Whirlpool washing machine has issues, turn it off for a few minutes. Then, jiggle the timer for a few seconds. If the washer starts working, then it might be time to pick a new timer.
6. Install the Lid Assembly
As with the most components on our list, the lid assembly of your washer serves as a source of your problems. To get the assembly fixed, test the current lid assembly with a multimeter. Then spend a few minutes installing a new one.
7. Focus on the Control Board
As soon as the Whirlpool washer control board goes bad, you can end up with a “Start and Stop” problem. To get things sorted out, have an expert fix a new one on your machine.
8. Work on the Door
As you close the door of the washer, it starts the washing process on the Whirlpool machine. But if the door opens (during a cycle), then you will have to get the door fixed. To get the best results, replace the switches on the door.
9. Get a Technician
Although our hacks might work, they are not entirely perfect. So even if you use them, they might not be able to fix your Whirlpool washer that does go off after a few minutes.
Supposing you have this problem, ring up a certified technician to get your washer fixed. If you do not know the best hands for the job, perform an online search for the technicians in your area. Then check their customer reviews before using their services.