Sceptre TV Problems and Solutions

Sceptre TV has been around for several decades. It has gained a lot of popularity because of the high quality of its products. One of the main advantages of purchasing a TV from this brand is that the TVs are quite affordable. Don’t let their prices fool you, they are packed with quality, acoustic sound, and crisp images.

It is not strange to hear owners of Sceptre TVs complain of certain problems. These problems are common with every TV brand and can be very frustrating. The good news is that you can easily troubleshoot most of these problems without any prior expertise. This post will show you some of the most common Sceptre TV problems and their solutions.

sceptre tv problems and solutions

Common Sceptre TV Problems and Solutions

This section will show you different Sceptre TV problems and simple DIY solutions that you can employ to fix them.

TV doesn’t come on

Several reasons exist why your Sceptre TV wouldn’t come on. Some of them include:

  • Faulty power source.
  • Faulty connection between the power cable and the socket.
  • Software issues.

There are several ways to solve the problem. Check below for some of them:

  • Switch off the TV and unplug it from the socket. Plug it back in and check if it would come on.
  • Another way to fix the problem is to change the power socket that you connect your TV to.

If none of these methods switches the TV on, then you should consult a professional. You can reach out to a Sceptre TV consultant around you for the best results.

Black picture

Experts regard the “black picture” issue as the second most common among Sceptre TV owners. This problem can be caused by any of the following:

  • Screen malfunction.
  • Cable or satellite TV problems.

Sorting out this problem is pretty easy. You can employ the steps below:

  • Check for screen damage by pressing your remote. If you can see responses on the TV screen, it means that your screen is intact.
  • To check for cable or satellite signal issues, connect your TV to a different feed source like a laptop. You can also connect the satellite or cable box to a different TV. You should get images from a different feed source if the box is the problem. Also, if the box has issues, the screen of the other TV will be black.

If these methods don’t solve the problem, then you need professional help. Contact a Sceptre TV specialist around you to help in solving the problem.

No audio

Audio problems aren’t uncommon with Sceptre TVs. In some cases, you get audio from certain channels while other channels will be mute. This problem is more common when you connect your TV to a satellite or cable box using an HDMI cable. Most of the time, the cause of the problem is the satellite connection.

When this problem occurs, you should try establishing the connection using an analog cable. After doing this, change the channel and check for audio. You can also connect the TV to a different feed source if there is still no sound. By now, there should be sound from the TV otherwise, you should seek professional help.

Off-balance picture

This is another very common problem with Sceptre TVs, especially the ones connected to antennas. Why does this problem occur? The main cause of the issue is that the satellite signal isn’t strong enough to produce clear pictures.

How do you solve the problem? An easy DIY fix is to change the position of the antenna. Bringing it closer to your TV should help even though in some cases, moving further away solves the problem.

Excessive background noise

Not all Sceptre TVs experience this problem but in the ones that do, it is pretty frustrating. When the background noise is much, you can hardly hear what you are watching or recognize voices. It is more like seeing a movie or watching a TV show in a very noisy room.

How do you solve this problem? Consider any of the actions below:

  • Adjust the TV volume as much as you can. Ensure that you stop increasing the volume once it begins to distort.
  • Switch off any TVs or radios nearby as they may interfere with your TV’s sound.
  • Install a noise filter in front of your Sceptre TV. You can purchase one online or at an electronics shop. These devices help to improve your TV’s audio clarity.

No response to remote

Have you tried using your remote to control your Sceptre TV but there is no response? This problem is very common and it is mostly because something is obstructing the IR signal from the remote.

Fixing this issue is pretty easy. Check that nothing is standing between the remote and the TV. It could also be that the remote batteries are dead and you need to change them. Once you change the batteries and there is still no response, it could mean that the remote is damaged and you need to change it.

Remote control responding to some commands

Sometimes, you will notice that your TV only responds to some of the controls on your remote. If you make use of the “QWERTY” remote, dust or grime is likely causing this issue. You can solve it easily by cleaning the buttons. Check the steps below to clean your remote control:

Step 1: Unplug the power cable of your TV from the power source for 15 minutes.

Step 2: Take off the back cover of the remote and clean the buttons using an alcohol swab.

Step 3: Ensure that you don’t allow the alcohol to touch the printed circuit board.

Step 4: Restore the back cover then plug in the TV to the power source.

Step 5: Test the remote again.

The buttons should be working because this process helps to resolve their memory so that they can return to their initial functionalities.